C-type Radial Contact Ball Bearing Series Thin-wall Bearings

Introduction to C-type radial contact ball bearing series thin-wall bearings

Radial contact ball bearings are designed to support radial loads, which are forces acting perpendicular to the shaft.

These bearings consist of inner and outer rings with a set of balls in between. The contact angle between the balls and the raceways is designed to primarily handle radial loads.

Commonly used in applications where the primary load is radial, such as in electric motors, pumps, and gearboxes.

Suitable for high-speed operations and situations where precise radial positioning is crucial.

Send E-mail Request Quote

Parameter

8mm

Snapover separator
5/32 (inch) balls
F= 0.8 Bearing corners are normally chamfered

Type	Major dimensions		Weight	Rated loading		Equivalent
	Major dimensions			Radial
	d			Static	Dynamic
	mm	mm	kg	Co（N）	Cr（N）	KATDON
LK02508CP0	25	41	0.06	303	255	K02508CP0
LK05008CP0	50	66	0.08	556	350	K05008CP0
LK06008CP0	60	76	0.09	656	384	K06008CP0
LK07008CP0	70	86	0.1	758	417	K07008CP0
LK08008CP0	80	96	0.1 1	859	448	K08008CP0
LK09008CP0	90	106	0.13	959	478	K09008CP0
LK10008CP0	100	116	0.14	1061	507	K10008CP0
LK11008CP0	110	126	0.15	1162	534	K11008CP0
LK12008CP0	120	136	0.16	1262	561	K12008CP0
LK13008CP0	130	146	0.17	1364	588	K13008CP0
LK14008CP0	140	156	0.18	1465	613	K14008CP0
LK15008CP0	150	166	0.2	1565	638	K15008CP0
LK16008CP0	160	176	0.2	1666	662	K16008CP0
LK17008CP0	170	186	0.2	1767	686	K17008CP0
LK18008CP0	180	196	0.21	1868	709	K18008CP0
LK19008CP0	190	206	0.21	1944	725	K19008CP0
LK20008CP0	200	216	0.22	2045	748	K20008CP0
LK25008CP0	250	266	0.28	2550	853	K25008CP0
LK30008CP0	300	316	0.35	3055	949	K30008CP0
LK32008CP0	320	336	0.39	3257	985	K32008CP0
LK34008CP0	340	356	0.42	3459	1016	K34008CP0
LK36008CP0	360	376	0.46	3636	1050	K36008CP0

8mm (double-sided seal)

Snapover separator
5/32 (inch) balls
F= 0.8 Bearing corners are normally chamfered
Type	Major dimensions		Weight	Rated loading		Limiting Speed	Ultimate Torque	Equivalent
	Major dimensions			Radial
	d			Static	Dynamic
	mm	mm	kg	Co（N）	Cr（N）	RPM	N-m	KATDON
LJ02508CP0	25	41	0.06	303	255	5580	0.02	J02508CP0
LJ05008CP0	50	66	0.08	556	350	3180	0.04	J05008CP0
LJ06008CP0	60	76	0.09	656	384	2710	0.05	J06008CP0
LJ07008CP0	70	86	0.1	758	417	2360	0.07	J07008CP0
LJ08008CP0	80	96	0.11	859	448	2090	0.09	J08008CP0
LJ09008CP0	90	106	0.13	959	478	1880	0.12	J09008CP0
LJ10008CP0	100	116	0.14	1061	507	1700	0.15	J10008CP0
LJ11008CP0	110	126	0.15	1162	534	1560	0.18	J11008CP0
LJ12008CP0	120	136	0.16	1262	561	1440	0.22	J12008CP0
LJ13008CP0	130	146	0.17	1364	588	1330	0.26	J13008CP0
LJ14008CP0	140	156	0.18	1465	613	1240	0.3	J14008CP0
LJ15008CP0	150	166	0.2	1565	638	1160	0.35	J15008CP0
LJ16008CP0	160	176	0.2	1666	662	1090	0.4	J16008CP0
LJ17008CP0	170	186	0.2	1767	686	1030	0.46	J17008CP0

13mm

Snapover separator
1/4 (inch) balls
F=1.5 Bearing corners are normally chamfered
Type	Major dimensions		Weight	Rated loading		Equivalent
	Major dimensions			Radial
	d			Static	Dynamic
	mm	mm	kg	Co（N）	Cr（N）	KATDON
LK02513CP0	25	51	0.11	517	535	K02513CP0
LK05013CP0	50	76	0.18	905	697	K05013CP0
LK06013CP0	60	86	0.21	1099	775	K06013CP0
LK07013CP0	70	96	0.24	1228	819	K07013CP0
LK08013CP0	80	106	0.26	1358	862	K08013CP0
LK09013CP0	90	116	0.29	1551	931	K09013CP0
LK10013CP0	100	126	0.32	1681	971	K10013CP0
LK11013CP0	110	136	0.35	1875	1035	K11013CP0
LK12013CP0	120	146	0.38	2004	1073	K12013CP0
LK13013CP0	130	156	0.41	2133	1110	K13013CP0
LK14013CP0	140	166	0.44	2327	1169	K14013CP0
LK15013CP0	150	176	0.46	2456	1204	K15013CP0
LK16013CP0	160	186	0.49	2586	1239	K16013CP0
LK17013CP0	170	196	0.52.	2780	1294	K17013CP0
LK18013CP0	180	206	0.55	2909	1327	K18013CP0
LK19013CP0	190	216	0.58	3038	1360	K19013CP0
LK20013CP0	200	226	0.61	3232	1411	K20013CP0
LK25013CP0	250	276	0.75	4008	1598	K25013CP0
LK30013CP0	300	326	0.89	4719	1754	K30013CP0
LK32013CP0	320	346	0.95.	5042	1823	K32013CP0
LK34013CP0	340	366	1.01	5365	1889	K34013CP0
LK36013CP0	360	286	1.06	5688	1954	K36013CP0

20mm

Snapover separator
3/8(inch) balls
F=1.5 Bearing corners are normally chamfered
Type	Major dimensions		Weight	Rated loading		Equivalent
	Major dimensions			Radial
	d			Static	Dynamic
	mm	mm	kg	Co（N）	Cr（N）	KATDON
LK02520CP0	25	65	0.34	1018	1178	K02520CP0
LK05020CP0	50	90	0.51	1600	1410	K05020CP0
LK06020CP0	60	100	0.58	1745	1452	K06020CP0
LK07020CP0	70	110	0.65	2036	1573	K07020CP0
LK08020CP0	80	120	0.72	2181	1617	K08020CP0
LK09020CP0	90	130	0.8	2473	1730	K09020CP0
LK10020CP0	100	140	0.86	2618	1773	K10020CP0
LK11020CP0	110	150	0.94	2909	1880	K11020CP0
LK12020CP0	120	160	1.01	3200	1982	K12020CP0
LK13020CP0	130	170	1.08	3345	2023	K13020CP0
LK14020CP0	140	180	1.15	3636	2121	K14020CP0
LK15020CP0	150	190	1.2	3781	2161	K15020CP0
LK16020CP0	160	200	1.3	4072	2254	K16020CP0
LK17020CP0	170	210	1.4	4363	2293	K17020CP0
LK18020CP0	180	220	1.5	4508	2383	K18020CP0
LK19020CP0	190	230	1.5	4800	2470	K19020CP0
LK20020CP0	200	240	1.6	4945	2507	K20020CP0
LK25020CP0	250	290	2.1	6108	2821	K25020CP0
LK30020CP0	300	340	2.3	7272	3111	K30020CP0
LK32020CP0	320	360	2.42	7708	3213	K32020CP0
LK34020CP0	340	380	2.54	8144	3312	K34020CP0
LK36020CP0	360	400	2.7	8581	3408	K36020CP0