Introduction of Constant Cross-section Thin-walled Four-point Contact Ball Bearing
Industrial production replaces KAYDON, INA precision equal section ultra-thin wall ball bearings
KA series, KB series, KC series, KD series, KF series, KG series.
Our large, medium and small high-precision ultra-thin wall ball bearing products can be divided into seven open series and five sealed series. Three types: deep groove ball type, angular contact ball type, four-point contact ball type. The materials are available in three types: bearing steel, silico-manganese steel and stainless steel. The inner diameter of the imperial system ranges from 0.2 inches to 60 inches, and the cross-sectional size ranges from 0.1875 inches X 0.1875 inches to 1.000 inches X 1.000 inches. The inner diameter of the metric system ranges from 4 mm to 2500 mm, and the cross-sectional size ranges from 3 mm to 30 mm. There are three types of open series: deep groove ball structure (type C), angular contact structure (type A). And four-point contact ball structure (type X), open and sealed two types: deep groove ball structure (type C) ): Four-point contact structure (X type) angular contact structure (A type). The size ranges from the inner diameter of 4mm-1500mm, and the accuracy is P5.P4.P2. Products are widely used in aerospace, industrial robots, medical equipment, precision turntables, CNC machine tools, communication radars, welding equipment, astronomical instruments, clamping equipment, antennas and Optical equipment, food processing equipment, glass production equipment, rotary table, optical scanning equipment, satellite communication equipment, textile machinery, robotics and semiconductor manufacturing equipment, etc.
Our factory has already mastered the technological breakthrough point of this ultra-thin-walled bearing. It has long been possible to control the deformation and internal stress changes of ultra-thin-walled bearings. This special control method of our factory has already applied for profit.
It can also design and process precision non-standard thin-walled bearings according to the specific requirements of customers. Welcome new and old users to call us!
Drawing
Quality Standard
Rockewell Bearings has added parameters that are not defined by ISO/ABEC for customers, including preload tolerances, functional tests, traceability and micron codes, cleanliness, raceway curvature, balls, etc. and roundness, surface processing (function And non-functional surfaces), steel specifications, cage trim and design, and installation chamfering. The definition of these parameters improves the quality of precision angular contact ball bearing products, thereby improving the performance of machine tool spindles.
The element of precision angular contact ball bearings is the cage, which is very important for machine tool bearings. The performance of the cage will affect the stability of machine tool bearings under high-speed rotation. The standard cage produced by Rockewell is made of phenolic resin. The internal design and the tolerance of the pocket gap are tight and the guide surface is controlled to ensure the stability of the cage during high-speed operation, lubrication and dynamic load.
The two elements of precision angular contact ball bearings are cleanliness, which is very important for precision angular contact ball bearings. Generally, the parts of the bearing products must be cleaned with a multi-solvent for 3 hours to prevent impurities from entering the bearing and prevent inherent pollution sources. In addition, the non-working surface of the bearing must be ground to ensure that the bearing is free of impurities before leaving the factory. Therefore, the bearing products produced by Rockewell can increase the normal operating time of the machine tool.
There are two main structural design methods for precision angular contact ball bearings: the high-rigidity WI series and the high-speed HX series to meet the requirements of different applications. The basic, open Rockewell bearing design has a higher spindle speed and greater dynamic radial stiffness, so the spindle can cut more material in a shorter time while ensuring excellent finished product tolerances. These improvements are attributed to the combination of the ball body and the precision engineering design of the raceway profile, which improves the processing rate.
English
Arabic
Russian
